Adjusting the position, Shift adjustment | Panasonic PT-D7600U

Adjusting the position

Desired position can be achieved by following the procedure below.

Shift adjustment

This function allows the user to adjust the picture position vertically or horizontally if the position of the image projected on the screen is displaced when the projector is properly positioned against the screen.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

:MENU SELECT

ENTER:SUB MENU

POSITION

SHIFT

SIZE	VID AUTO
BLANKING
KEYSTONE
EDGE BLENDING

:MENU SELECT

ENTER:SUB MENU

SHIFT

V:0

H:0

Press the “MENU” button.

The MAIN MENU screen will be displayed

Select the “POSITION” with the buttons.

Press the “ENTER” button.

The POSITION screen will be displayed.

Select “SHIFT” with the buttons.

Press the “ENTER” button.

The SHIFT screen will be displayed.

Adjust the position with the buttons.

Press the “MENU” button three times.

The on-screen indications disappear and the normal screen appears again.

:ADJUST

<For horizontal (right and left) adjustment>

Pressing button will move the image to the right.

Pressing button will move the image to the left.

<For vertical (up and down) adjustment>

Pressing button will move the image upward.

Pressing button will move the image downward.

57

Image 57

Panasonic PT-D7600U operating instructions Adjusting the position, Shift adjustment

Contents

Model No. PT-D7500U Commercial Use Dear Panasonic Customer Model number PT-D7500U / PT-D7600USerial number Page Contents Precautions with regard to safety Use only the Specified battery Insulate the battery using tape or similar before disposalDo not place liquid containers on top of the projector Do not insert any foreign objects into the projector Do not look into the lens while the projector is being used AccessoriesDo not use the old lamp unit Lamp section may break Precautions on handling Examples of system expansion Remote control When the operation mode selector is set to ProjectorName and function of parts When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel Video OUT terminal Video in terminalRGB YPBPR2 input/RGB YPBPR1 output terminal pages 26 REMOTE2 terminal Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control unitProcedure of ID setting Using the remote control as a PC mouse Using a wired remote controlOperation mode selector switch Installation Adjusting the leveling feetProjection scheme Installation geometry Projection distance SH Effective screen height Size EffectiveInch Installation Screen dimensions Projection distance L Zoom lensFor the screen aspect ratio Units m feet/inches WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE1SC ET-D75LE1ET-D75LE2 ET-D75LE2SC Connection Before starting connection· SYNC/Y SDA HD/SYNC SCL Example of connecting with Video devices Video deck TBC built-in Color monitor Control PCVideo deck TBC built-in High-vision video deck Example of connecting with personal computers ConnectionControl PC PC or color monitor With RGB input terminals Color monitor with RGB input terminal Example of connecting with the signal selector Installation of input module optional Installing the input moduleTypes of the input modules optional Register the input signal Procedure of installationRemove the slot cover Insert the input module Installation of input module optional Connecting signals to the input module Connecting the component signals Connecting the signal to the analog RGB signal input moduleRGB signal input module optional SUB BNC Connecting the video signals Connecting the signal to the video signal input moduleVideo signal input module optional BNC Connecting the component signals ET-MD95SD1 for 480i/576i Serial digital input module optional ET-MD95SD2 for 480p/480i/576i SD signal Business-use digital video deck Auto ET-MD95SD3 for HD SDI Connecting signals to the DVI signal input module Pin No SignalDVI-D input module optional How to install the projection lens How to remove the projection lensPull the projection lens Making adjustment and selection Powering up the projectorPress the l button. on the main unit or the remote control Roughly adjust the focus of the lens. Refer to Projection Powering off the projector Adjustment range after lens position optical shift How to adjust the lensChoose an item and adjust it using Buttons Floor projection Floor projection Ceiling projection Be sure to tighten the fixing screws beforeTransportation Automatic adjustment Auto Setup NEW Signal Input screen will be displayed Registration of input signal dataRegistration of new data Press the Menu button Confirm overwriting registration screen will be displayed If new registration is not available because of full memory How to erase sub memory How to register into sub memoryChange registered signals screen will appear Sub memory On-screen indications RestrictionsDesignation can be set by the sub memory items Using the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function Structure of menu screens On-screen menus Resetting to the factory default Menu items settingBasic operations on menu screen Returning to the previous screen Switching the picture mode Adjusting the pictureSwitching the AI control Select Picture Mode with the buttons Adjustment procedure to adjust picture color intensity Adjusting Contrast / Bright / Color / TintAdjust the level with Buttons Repeat Steps To adjust BRIGHT, Color or Tint Adjusting the color temperature Operation Adjustment RemarksUSER, STANDARD, NATURAL, CINEMA, Graphic Procedure of adjustment Adjusting color matchingSelect the desired color for adjustment With the buttons Select Picture with the buttons Press Enter button Sharpness / Gamma / Noise reduction / Pulldown mode Adjustment items OperationSelect Picture with the buttons To input Betacam with YCbCr Signal levelTo set the sRGB compliant picture Smpte Shift adjustment Adjusting the position Size adjustment screen will be displayed Size adjustment Size modes Select Blanking with the buttons Press the Enter button Blanking adjustment Clock phase adjustment Adjusting the input resolution Input Resolution screen will be displayedTotal DOTS, Displayed DOTS, Total Lines and Displayed Lines Select Position with the buttons Press the Enter button Adjusting the clamp positionClamp Position screen will be displayed Value changes from 1 to Adjust the vertical Linearity with Buttons Adjust the Keystone horizontally With the buttonsKeystone distortion correction Select Keystone with the buttons Press the Enter button Specify the area to be adjusted with the buttons Edge blending adjustmentTo display the adjustment marker Adjustment marker Changing the display language Select the Bright with the buttons Press the Enter buttonSelect the Language with the buttons Press the Enter button How to change the system format Video Setting screen will be displayed Procedure of settingSelect Option with the buttons Press the Enter button Option screen will be displayed How to use RGB Reality mode Option settings ID number settingID number need not be set when only one projector is used FRONT-F FRONT-C REAR-C REAR-F Installation Setting Lamp select Lamp powerLamp cooling time RGB2 select Automatic adjustment Video settingSystem information Fan control Subwindow Main windowFrame lock Type Setting FUNC1 PasswordList of P in P Select Option with the buttons Press Enter button Setting the contrast modeMode ContrastNormal Maximum Brightness Maximum Normal These buttons toggle between 75 Ω and HI-Z TTL SYNC. TermHI-Z TTL Pin assignments and signal names Using the serial terminalsCommunication conditions Factory setting Examples of connection Procedure of setting communication conditions RS232C Setting screen will be displayedPress and buttons to select Option Press the Enter button Control commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Pin assignments and control Using the Remote 2 terminalSub 9-pin female External appearance Displaying the internal test pattern RS-422 control functionsCycle of displayed internal test patterns How to use network module optional Example of connectionName and function of network module parts Initial setting of network module Network Setting screen will be displayedMenu screen will be displayed Items Function Description Address automatically using the Dhcp serverSet to OFF if Dhcp server is not used Port No Accessing from the Web browser Top Network setting Network setting Projector control Status indication Smtp Mail setting Mail setting page continuing How to use network module optional For control of image files Lamp Information Checkpoint Remedial measure Indication of monitor lampIndication Monitor Procedure of cleaning Cleaning and replacement of air filterClean the air filter Dismantle the air filter Timing of lamp unit replacement Replacement of lamp unit Fixing screws Lamp unit cover Procedure of lamp unit replacement Press the Enter button. When OK? is displayed, press An item Lamp Reset will be addedUsed hours of the specified lamp unit will be reset to zero Power does not turn on Symptoms CheckpointRemote control does No image appears on PT-D7500U Specifications PT-D7500U PT-D7600U Appendix Compatible RGB/YPBPR Signals 530 Units mminch Outside dimensions Concernant LA Sécurité Ne pas couvrir le filtre et la sortie d’air Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifier Ne pas placer des récipients de liquide sur le projecteur Ne pas placer le projecteur sur des surfaces instablesNe démontez pas le bloc lampe Ne pas mettre d’objets étrangers dans le projecteur Nutilisez pas un bloc lampe usagé ’utiliser que la pile indiquéeCela peut entraîner une rupture de la lampe Sinon cela peut causer des chocs électriques Nettoyage et maintenance Précautions pour la manipulationMise au rebut Période de remplacement de la lampe Remplacement de la lampe Procédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséeVis de fixation Cache de la lampe 111 Technical Support Professional/Industrial Video800 FAX 201 Mail pbtssupport@panasonic.com Panasonic Canada Inc