Panasonic PT-D7600U operating instructions How to change the system format

How to change the system format

Pressing the SYSTEM SELECTOR button on the remote control or the control panel of the main unit allows the user to make the following changes depending on the currently selected input module.

The name of the selected system such as RGB, YPBPR and AUTO is displayed on the top left of the screen and disappears automatically.

S video / Video terminal input signal

For the setting of	:	AUTO1	NTSC	PAL	SECAM
AUTO1
			PAL60	NTSC4.43
For the setting of	:	AUTO2	NTSC	PAL-M
AUTO2
			PAL-N
RGB signal input module	:	RGB	RGB REALITY		YPBPR	* For 720P and 1080i input
ET-MD95RGB
		RGB	RGB REALITY		YCbCr	* For 480i,576i,480P input
Video signal input module						The SYSTEM SELECTOR button
						is ineffective with other types of
ET-MD95VM2						signals.
For the setting of	:	AUTO1	NTSC	PAL	SECAM
AUTO1						* For the details on the setting for
			PAL60	NTSC4.43
ET-MD95VM2						AUTO1, AUTO2 or YCbCr, refer to
For the setting of	: AUTO2		NTSC	PAL-M		page 68.
AUTO2
For the setting of			PAL-N			* When the STD (standard) button is
ET-MD95VM2	:	AUTO	480i	576i		pressed while changing the system
YCbCr						mode (with the SYSTEM
						SELECTOR), the projector
Serial digital input module						automatically returns to AUTO1,
						AUTO2, or AUTO.
ET-MD95SD1	:	AUTO	480i	576i
ET-MD95SD2	:	AUTO	480p	480i		576i
ET-MD95SD3	:	AUTO	1080/60i		1035/60i	720/60p		1080/24p
		1080/24sF		1080/25p		1080/30p	1080/50i

*“AUTO 1”: Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.

“AUTO 2”: Selection is automatically made out of NTSC, PAL-M and PAL-N.

RGB1/RGB2 terminal input signals
For 720p, 1080i input:	RGB
			YPBPR
For 480i, 576i, 480p input:
		RGB		YCbCr

For the signals other than those above, SYSTEM SELECTOR button is invalid.

67