Do not look into the lens while the projector is being used.
•Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.
Do not bring your hands or other objects close to the air outlet port.
•Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat.
Replacement of the lamp unit should only be carried out by a qualified technician.
•The lamp unit has high internal pressure. It can easily become damaged if struck against hard objects or dropped, and injury or malfunctions may result.
Do not use the old lamp unit.
•The lamp section may break.
Replacement of the lamp unit should only be carried out after it has completely cooled off, otherwise burns may result.
Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.
•Electric shocks can result if this is not done.
Ask an Authorized Service Center to clean inside the projector at least once a year.
•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.
•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Center to clean the projector when required. Please discuss with the Authorized Service Center regarding cleaning costs.
Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.
An effort to keep our environment clean, Please bring the non repairable unit your Dealer or a Recycling Company.
Accessories
Check that all of the accessories shown below have been included with your projector.
Remote control unit [N2QAGB000024 x 1]
ON POWER OFF
|
| AUTO |
|
| SETUP |
RGB | RGB | AUX |
1 | 2 | |
|
| SHUTTER |
VIDEO | SHUT | |
MENU | FREEZE |
|
PAGE UP
ENTER
PAGE DOWN
ON SCREEN
1 STD 2 OSD 3 SYSTEMSEL
|
| D.ZOOM | ||
4 | FUNC | 5 | 6 | |
1 | ||||
|
| BRIGHT | CONTRAST | |
7 LENS | 8 | 9 | ||
| NEXT | ASPECT | 0 USER | |
| LIGHT | ID ALL | ID SET | |
Computer | LASER ON/OFF | |||
Projector | ||||
| Numetric | |||
Power cord [K2CF3EH00001 x 1]
wired cable for remote control [15m (49'3"), K1EA03NA0001 x 1]
Battery for remote control unit [R03NPA/2ST x 1]
7
