Edge blending adjustment
This projector has the function to hide the seams for
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
POSITION
SHIFT
SIZE | VID AUTO |
BLANKING |
|
KEYSTONE |
|
EDGE BLENDING |
|
:MENU SELECT
ENTER:SUB MENU
EDGE BLENDING
UPPER | OFF | 128 |
LOWER | OFF | 128 |
LEFT | OFF | 128 |
RIGHT | OFF | 128 |
MARKER | OFF |
|
BRIGHT |
|
|
:MENU SELECT
:ADJUST ENTER:CHANGE
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select the “POSITION” with the buttons.
Press the “ENTER” button.
The POSITION screen will be displayed.
Select “EDGE BLENDING” with the 
buttons.
Press the “ENTER” button.
The EDGE BLENDING screen will be displayed.
Specify the area to be adjusted with the 
buttons.
To joint the top: set “UPPER” to “ON”.
To joint the bottom: set “LOWER” to “ON”.
To joint the left: set “LEFT” to “ON”.
To joint the right: set “RIGHT” to “ON”.
Press the “ENTER” button to toggle “ON” and “OFF”.
Adjust the correction width with the buttons.
<To display the adjustment marker>
Select “MARKER” with the buttons.
Select “ON” with the ENTER buttons.
The optimal point is where these lines overlap.
Note
Adjustment marker
When the “MARKER” is set to “ON”, the image position adjustment marker is displayed.
Green lines are shown on the top and the left of the displayed picture frame and red lines are displayed on the right and the bottom.
The optimal point is the position where the red line of one frame overlaps the green line of the other frame.
Notice:
The correction widths of the jointed frames must be the same value all the time.
The optimal joint cannot be achieved if the jointed frames have different correction widths.
65
