Panasonic PT-D7600U operating instructions Video in terminal, Video OUT terminal, REMOTE2 terminal

Name and function of parts

Side-mounted connection terminals

S-VIDEO IN

IN		OUT
REMOTE 1				REMOTE 2
		VIDEO	OUT
	IN				R/PR

	RS-232C (G) / RS-422 (R)		RS-232C (G) / RS-422 (R)
		IN		OUT	SERIAL
		RGB 1 IN			RGB 2 IN / RGB 1 OUT
G/Y		B/PB SYNC/HD		VD

S-VIDEO IN terminal (pages 24 and 25) An input terminal for S-video signals (MIN4-pin DIN).

This terminal complies with S1 signals and automatically toggles between 16:9 and 4:3 according to the size of input signals.

VIDEO IN terminal (page 25)

An input terminal for video signals. (BNC)

VIDEO OUT terminal (page 25)

An output terminal (active through) for video signals. (BNC)

SERIAL IN terminal (pages 25–27, 78–80) This terminal is an RS-232C/RS-422 compliant input terminal (switching necessary) to connect a PC and to externally control the main unit (D-SUB9-pin female).

SERIAL OUT terminal (pages 26, 27, 78–80) This terminal is an RS-232C/RS-422 compliant output terminal (switching necessary) to supply signals given to the serial input terminal (D-SUB9-pin male).

RGB (YPBPR)1 input terminal (pages 26, 27)

A terminal to input RGB or YPBPR signals (BNC).

RGB (YPBPR)2 input/RGB (YPBPR)1 output terminal (pages 26, 27)

This terminal (active through) receives RGB or YPBPR signals or supplies signals given to the RGB1 input terminal (D-SUB 15-pin female).

REMOTE2 terminal (page 81)

The user can remotely control the main unit by using an external control circuit to this terminal (D-SUB 9-pin female).

REMOTE1 lN/OUT terminal (page 17) When two or more main units are used in the system, they can be connected and controlled with a wired remote control cable (M3 jack).

14