Panasonic PT-D7600U These buttons toggle between 75 Ω and HI-Z TTL, SYNC. Term, Hi-Z Ttl

How to switch the input impedance (signal level) of the synchronization signal

When the ET-MD95RGB input module (sold separately) is mounted, the user can switch the input impedance (signal level) of the synchronization signal with the analog RGB input.

Choose 75 Ω when connecting with the equipment whose synchronization output impedance is 75 Ω such as a signal selector, or switch to HI-Z (TTL) when connecting with the equipment whose synchronization output is TTL such as a video card of a PC.

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

:MENU SELECT

ENTER:SUB MENU

OPTION

SYSTEM INFORMATION

VIDEO SETTING

AUTO SETUP

SYNC. TERM	75
P IN P	ON
FUNC1	P IN P
CONTRAST MODE	HIGH
PASSWORD
:MENU SELECT
:CHANGE

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the buttons.

Press the “ENTER” button.

The OPTION screen will be displayed.

Select “SYNC. TERM” with the buttons.

Switch the input impedance (signal level) of the synchronization signal

with the buttons.

•These buttons toggle between 75 Ω and HI-Z (TTL).

SYNC. TERM	Signal level	Input impedance
75 Ω	Amplitude: 0.6V[p-p] to 4.0V[p-p]	75 Ω
HI-Z (TTL)	High level: 2.0 V or over	1 kΩ
	Low level: 0.8 V or lower

Note • Switch the input impedance according to the input signal.

• The factory default is 75 Ω.

• The clock phase and image position may become out of balance during this switching operation. Please make readjustment accordingly.

77