Panasonic PT-D7600U If new registration is not available because of full memory

If new registration is not available because of full memory:

If the number of already registered signals is 96, or the memory is full when you entered a new signal, then press the MENU button of the remote control or the operating section of the main unit, and a “Confirm overwriting registration” screen appears. This means to erase registered signal and to register a new signal by overwriting. In this case,

erase the registered signal and register a new signal by overwriting using the following Steps to :

MEMORY FULL
OVERWRITE?
NAME:
MEMORY NO:	– –
S.S.NO:	– – –
INPUT NO:	VIDEO
fH:	15.73kHz
fV:	59.94Hz
FORMAT:	NTSC
ENTER:EXECUTE	MENU:ESC

SELECT OVERWRITE SIGNAL.

	A1:SVGA72-A1	RGB1	– – –
	A2:SVGA72-A2	RGB1	– – –
	A3:SVGA72-A3	RGB1	– – –
	A4:SVGA72-A4	RGB1	– – –
	A5:SVGA72-A5	RGB1	– – –
	A6:SVGA72-A6	RGB1	– – –
	A7:SVGA72-A7	RGB1	– – –
	A8:SVGA72-A8	RGB1	– – –
	:SELECT	ENTER:SET
OVERWRITE THIS SIGNAL.
	NAME:	SVGA72-A3
	MEMORY NO:	A3(3-2)
	S.S.NO:	– – –
	INPUT NO:	RGB1
	fH:	48.08kHz
	fV:	72.17Hz
	SYNC. STATE:	H(POS)
		V(POS)

Press the “MENU” button.

The “Confirm overwriting registration” screen will be displayed.

Press the ENTER button.

The SIGNAL LIST screen will be displayed. The memory list contains 96 data items on its 12 pages (8 each on A to L pages).

Select the signal to erase with the , , and buttons.

Press the ENTER button.

The SIGNAL STATUS screen will be displayed. If you do not want to erase, press the MENU button to return to the “SIGNAL LIST” screen.

Press the ENTER button.

This erases the signal selected in Step and the “SIGNAL STATUS” screen for the overwritten signal appears. In each item, automatically identified content of the new signal is displayed.

Further Steps are the same as Step on page 44.

ENTER:EXECUTE MENU:ESC

45