Clock phase adjustment
Clock phase adjustment achieves the best image when the screen flickers or halo is observed around the contour.
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
POSITION
SHIFT
SIZEDEFAULT
BLANKING
CLOCK PHASE0
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT 
:ADJUST
Press the “MENU” button.
The MAIN MENU screen will be displayed
Select the “POSITION” with the buttons.
Press the “ENTER” button.
The POSITION screen will be displayed
Select “CLOCK PHASE” with the buttons.
Adjust the clock phase with the buttons.
The value changes from 0 to 31.
Note • No optimal value may be obtained if the output of the PC to which the signal input is applied is unstable.
•No optimal value may be obtained if the total number of dots is not correct.
•The clock phase can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and the analog input module (optional:
61
