Paradyne 8540, 8546 manual IP Injection Tool Group Objects Table

5446 RTU Setup

IP Injection Tool Group Objects Table

Table C-1. IP Injection Group Objects (ipInjectionTable 1) (1 of 2)

Object	Description	Setting/Contents
ipInjectionType	Indicates the type of IP address for	H null(1) – Use to add a new row. Defaults:
(ipInjectionEntry 1)	each entry.	– Address: 0.0.0.0
	Changing the NAP IP address	– Mask: 255.255.255.255
	resets the database and any of the	– Status: static
	following entries are cleared:
		H nap(2) – Network Access Provider IP address entry.
	H serviceProvider(3)
		Should not be added, modified, or deleted via
	H host(4)	SNMP.
	H defaultGateway(5)	H serviceProvider(3) – Device IP address assigned
		to the 5446 Ethernet port in the Network Service
		Provider domain.
		H host(4) – Host IP address entry for local hosts,
		local subnets, remote subnets, and next hop router
		IP address.
		H defaultGateway(5) – Default gateway IP address
		entry.
ipInjectionAddr	Specifies the IP address for the first	IP address for the NAP or service provider (NSP):
(ipInjectionEntry 2)	object’s entry of IP Injection Type.	H nnn.255.255.255 – Range for the first byte nnn is

Hnull(1) – Null entry used to add a 001 to 223, with the exception of 127. Range for the

	row to create an entry.	remaining three bytes is 000 to 255.
	H nap(2) – Device IP address in	IP address for Host Route:
	the NAP domain.	H nnn.255.255.255 – Range for the first byte nnn is
	H serviceProvider(3) – Device IP
		001 to 239, with the exception of 127. Range for the
	address in the Network Service	remaining three bytes is 000 to 255.
	Provider domain.	IP Injection type of Default Gateway:
	H host(4) – Host IP address entry
		H 0.0.0.0 – Default IP address. Cannot be changed.
	for locally attached host, local
	subnet, remote subnet, and next
	hop router IP address.
ipInjectionMask	The subnet mask must be	The subnet mask entry cannot be 0.0.0.0 for IP
(ipInjectionEntry 3)	contiguous and left-justified. When	Injection type of NAP, Host, and service provider.
	an arbitrary mask is not supported,	When the IP Injection Type is default gateway, the
	the SNMP agent constructs the	subnet mask defaults to 0.0.0.0 and cannot be
	value of the ipInjectMask based on	changed.
	the ipInjectionAddr entry as
	Class A, B, or C.

8000-A2-GB20-50 April 2000 C-11