Paradyne 8546, 8540 manual Viewable 5446 RTU ARP Table

5446 RTU Setup

Table C-1. IP Injection Group Objects (ipInjectionTable 1) (2 of 2)

Object

Description

Setting/Contents

ipInjectionStatus	Specifies the address status of	Type of static or dynamic addressing for each entry.
(ipInjectionEntry 4)	static or dynamic. When the 5446	The default is static(1).
	RTU is reset, static addresses are	H static(1) – Static addresses are assigned for the
	saved and dynamic addresses are
		duration of the service subscription. For an
	not saved.
		ipInjectionType of serviceProvider(3), static(1) is the
		required entry.
		H dynamic(2) – Dynamic addresses are only
		assigned for the duration of the application session.
		H invalid(3) – Used to delete an entry from the table.
ipInjectionNHRAddr	When using a Next Hop Router, the	The Next Hop Router field is used to provide:
(ipInjectionEntry 5)	IP address of the router is entered.	H The IP address which identifies the input port of the
	This entry is only valid when
		Next Hop Router for a specific defined host or
	ipInjectionType is set to host(4) or
		subnet.
	defaultGateway(5).
	When the ipInjection type is set to	H Locally attached default gateway router for
		downstream traffic when the destination is
	defaultGateway(5):
		unknown.
	H The Default Gateway IP address
	is entered in the Next Hop
	Router field.
	H The IP address and subnet mask
	default to 0.0.0.0. No other entry
	is valid.
	H Next Hop Router is the IP
	address of the locally attached
	host (route) that downstream
	traffic is forwarded to when the
	destination is unknown.

Viewable 5446 RTU ARP Table

The Viewable ARP Table is a standard MIB-2 object that should come with most browsers. This allows you to use the MIB browser to do a query on the

5446 RTU to retrieve ARP cache information.

To view the ARP Table, use the standard MIB-2 OID 1.3.6.1.2.1.4.22.

C-12 April 2000 8000-A2-GB20-50