Paradyne 8546, 8540 manual RTU Options, RTU Selection

RADSL Card Configuration

Table 3-8. RTU Options

RTU Selection A-H-A

Displays RTU information such as RTU type, system, location, contact, model number, serial number, version of firmware, and version of hardware.

Port # – Enter the RTU port number.

RTU Type – Model number of endpoint. For Model 8540, possible endpoints are 5246/5216. For Model 8546, possible endpoints are 5446r1/5446r2.

System Name – 16 alphanumeric characters. Name assigned to the RTU.

System Contact – 32 alphanumeric characters. Name or number of the person responsible for the RTU.

System Location – 16 alphanumeric characters. Physical location of the RTU. System Circuit ID – 32 alphanumeric characters. Circuit ID of the RTU. Model Num* – Model number of card. (This field is read-only.)

Serial Num* – Serial number of card. (This field is read-only.)

Firmware Rev.* – Version of firmware. (This field is read-only.)

Hardware Rev.* – Version of hardware. (This field is read-only.)

CAP Rev* – Version of CAP Release. (This field is read-only.)

Reset RTU? – Yes/No. (This field will not appear if the RTU type is 5446r1 or 5446r2.) RTU Selftest Result – The results of the RTU selftest, if supported by the RTU.

* If available, information in these fields is displayed.

3-32 April 2000 8000-A2-GB20-50