Paradyne 8546, 8540 manual DSL Configuration Users Screens

RADSL Card Configuration

DSL Configuration Users Screens

Use the system information submenu of the Users screens to configure user login accounts for Telnet sessions directly to the DSL cards.

User accounts provide security for the DSL system by requiring that anyone who is trying to log on to the system has a valid password to gain access.

It is recommended that user accounts also be set up for each DSL card, even if you do not intend to Telnet directly to the RADSL cards, so that no unauthorized Telnet sessions can be made. Each card will support up to 10 user accounts with either Operator (read-only) or Administrator (read/write) permissions.

For information on setting up user accounts on the MCC card, see Hotwire

Management Communications Controller (MCC) Card User’s Guide.

"Procedure

To configure RADSL user accounts (if Telneting directly to the RADSL card) (for Model 8540 only):

1.Follow this menu sequence from the DSL Main Menu: Configuration → Users→ Accounts (A-D-A)

2.The Accounts screen appears. Enter the desired values in the fields as shown in Table 3-4.

3.Enter Y to save changes and press Ctrl-z to return to the Hotwire Chassis Main Menu tree.

Press Ctrl-v to see a list of all user accounts at the Login id prompt.

4.Reboot the RADSL card after the changes have been made (A-A-F).

3-18 April 2000 8000-A2-GB20-50