Hotwire Menus and Screens
Components of a Hotwire Screen
A typical Hotwire screen looks like this:
1
2
3
4
1.System Header Line is the top line of the screen. This line has two fields that provide system login information.
—The first field displays the chassis name or the individual card name. (Access the System Information screen by selecting the appropriate card
in the chassis and then follow this menu sequence: Configuration → Card Status → Card Info.) If you do not define the system name, the DSL user interface will display <no name>.
—The second field displays the current login. This field will display either
L:<user_login> or R:<user_login> where L indicates a local login,
R indicates a remote login, and <user_login> is the login account of the user currently accessing the system. For example, if a user with a login account called admin logs into the system using the local console, this field will display L:admin.
2.Display Area is the top portion of the screen on which pertinent DSL system information is displayed. This is also the portion of the screen on which fields requiring input are displayed. However, you cannot enter values for the fields in this portion of the screen. You must enter field values in the Input Line at the bottom of the screen (see #3 below).
3.Input Line is the area of the screen where you are prompted to enter values for the specific field that is highlighted on the screen.
For example, in the Static Routes screen above, the Item Number field is highlighted. If you want to add a new record, you must enter 0 at the item number (0 to add new record): prompt at the bottom of the screen.
April 2000 |
