Patton electronic 07MOS10xx-GS, 1063 port E1 3-port DS3/E3 2-port STM-1 optical and electrical

OnSite Series Getting Started Guide 1 • Product Overview

Figure 2. OnSite Model 1063

Table 3. Base System Configuration for OnSite Platforms

Type		Model OS1052	Model OS1063
SDH Trunks	2	STM-1	2 STM-1
Client Signals	8	E1 or 8 T1	21 E1 or 21 T1
	2	Ethernet	–
Management	Serial RS-232		Serial RS-232
	LAN		LAN
Expansion Slots	2		2

The OS1052 and OS1063 systems have two expansion slots. The expansion slots support the insertion of the following modules for flexible configuration changes and capacity upgrades:

•21-port E1

•3-port DS3/E3

•2-port STM-1 optical and electrical

•8-port Ethernet 10/100BASE-TX

Figure 3 on page 17 shows the front and back panels of the OS1052 base system without the expansion mod- ules installed. The OS1052 has eight built-in E1 and two built-in Ethernet 10/100BASE-TX interfaces. As a factory-installed option, the OS1052 is also available with eight T1 ports. The OS1052 uses a future bus con- nector for access to the 8 E1 or T1 ports on the base system.

Introduction 16