Patton electronic 07MOS10xx-GS, 1063 General Overview, Introduction, System Management Access

OnSite Series Getting Started Guide 4 • System Management Access

Introduction

This chapter provides the procedures for configuring and monitoring the local serial and LAN management (LM) ports, and the inband management channel (IMC) for remote management communications. The chap- ter also provides the procedures for configuring and using the Orderwire communications port (if the AUX port is factory-installed).

General Overview

The base OnSite OS-10 system provides two management ports from which you can access the system man- agement functions. One of the management ports is an Ethernet LAN (10/100BASE-TX) port. The other is an RS-232 SERIAL port.

Figure 14 shows the location of the two management ports on the base OS1052 and OS1063 systems.

Figure 14. Serial and LAN Management Ports on the Base OS1052 and OS1063 Systems

Introduction 40