Patton electronic 1063, 07MOS10xx-GS manual About this guide, Audience

About this guide

This guide describes how to install a Patton OnSite Series Model 1052 and1063 Metro-Optical Transport Access Node. For detailed configuration and management instructions, refer to the OnSite 1052 & 1063 Series Administrator’s Reference Guide, which is located on the CD-ROM that came with your unit and at www.pat- ton.com.

Installation, maintenance, and removal of a chassis or its components must be done by qualified service per- sonnel only. Qualified service personnel have had appropriate technical training and experience that is neces- sary to be aware of the hazards to which they are exposed when performing a task and of measures to minimize the danger to themselves and other people.

You should consider the following before unpacking your equipment:

•Install the equipment in a secured, enclosed, and restricted access area, ensuring that only qualified service personnel have access to the equipment.

•Install the equipment only in a temperature and humidity-controlled indoor area that is free of airborne materials that can conduct electricity.

•When you handle equipment that has expansion modules, put on the electrostatic discharge (ESD) wrist strap to reduce the risk of electronic damage to the equipment.

Note Leave the ESD strap permanently attached to the chassis or rack so that it is always available when you need to handle ESD-sensitive components.

Read the following safety information thoroughly before installing your OS- 10 system. Failure to follow this safety information can lead to personal injury or damage to the equipment.

WARNING

Audience

This guide is intended for the following users:

•Operators

•Installers

•Maintenance technicians

9