Patton electronic 07MOS10xx-GS, 1063 manual Configuring an Authorized OnSight NMS Server

OnSite Series Getting Started Guide 4 • System Management Access

To remove an existing SNMP trap receiver, follow these steps:

1.Select a trap receiver on the SNMP Trap Receivers page.

2.Click on Delete to remove the trap receiver.

At this point, the system removes the trap receiver, and it is no longer displayed in the table.

In addition to supporting the generation of traps to an SNMP-based NMS, the system also sends autonomous messages to all connected OnSight NMSs. The OnSight NMS provides centralized management and control of OS-10 systems in point-to-point, linear, and ring ADM subnetworks.

To display the OnSight NMS servers authorized to manage the OS-10 system, see Figure 19 and follow these steps:

1.Select the SYSTEM folder from the navigation menu.

2.From the expanded SYSTEM folder, select Management Access.

3.From the expanded Management Access folder, select NMS.

On the Authorized NMS Servers page, the table displays the IP addresses of the OnSight NMS servers autho- rized for management connectivity to the system.

To add an OnSight NMS server to the list of authorized servers, see Figure 19 and follow these steps:

1.On the Authorized NMS Servers page, click on Add.

2.In the Add Authorized NMS Server window, type the NMS IP Address and click on Apply.

3.Click on Close to close the window.

Figure 19. Configuring an Authorized OnSight NMS Server

Autonomous Alarm Messages 48