Patton electronic 07MOS10xx-GS, 1063 manual

OnSite Series Getting Started Guide 2 • Application Overview

The base OS1052 system is configured with:

•2 STM-1

•8 E1/T1

•2 Ethernet

•10/100Base-TX

Two expansion module slots allow increasing system capacity beyond the initial base configuration. Additional ports and features only require simple insertion of one of the many available types of TDM and packet data modules.

In only one RU, the OS1052 supports expansion up to:

•50 E1 ports

•18 Ethernet 10/100 ports

The OS1052 incorporates next-generation SDH features such as virtual concatenation (VCAT), link capacity adjustment scheme (LCAS) and generic framing procedure (GFP) for efficient packet data transport. The plat- form also incorporates Layer 2 features such as VLAN tagging, rate limiting and statistical multiplexing with multi-level QoS control. The OS1052 is easily configured and managed through a simple Web-based GUI interface or the scalable Patton OnSight NMS.

Figure 6. OS1052 Map + Modules

OS1052 Application 20