Patton electronic 07MOS10xx-GS manual OS1063 Map + Modules

OnSite Series Getting Started Guide 2 • Application Overview

The base OS1063 system is configured with:

•2 STM-1

•21 E1/T1

Two expansion module slots allow increasing system capacity beyond the initial base configuration. Additional ports and features only require simple insertion of one of the many available types of TDM and packet data modules.

In only one RU, the OS1063 supports expansion up to:

•63 E1 ports

•16 Ethernet 10/100 ports

The OS1063 incorporates next-generation SDH features such as virtual concatenation (VCAT), link capacity adjustment scheme (LCAS) and generic framing procedure (GFP) for efficient packet data transport. The plat- form also incorporates Layer 2 features such as VLAN tagging, rate limiting and statistical multiplexing with multi-level QoS control. The OS1063 is easily configured and managed through a simple Web-based GUI interface or the scalable Patton OnSight NMS.

Figure 8. OS1063 Map + Modules

OS1063 Application 22