U p d a t i n g F i r m w a r e
You can update the printer’s firmware. Make sure the Resident (Boot Loader) is version 2.3 or greater.
1. From the side menu, click Admin. The Web Admin Configuration screen appears.
2. Click Update Firmware.
3. Make sure your printer is connected and ready to receive data.
4. Type the TFTP Server IP address.
5. Type the relative pathname (relative to your TFTP server). Refer to your TFTP Server’s documentation for more information about setting up and using the TFTP server.
Note: Depending on your TFTP server, you may only need the filename, not the entire path.
6. Click Submit to load the firmware. If you lose power while updating the firmware, call Service.
