Paxar 9825 N f i g u r i n g N e t w o r k P r o t o c o l s, Click Protocol Control

C o n f i g u r i n g N e t w o r k P r o t o c o l s

Only configure the settings required for your network/printer. To enable or disable protocols:

1. From the side menu, click Admin. The Web Admin Configuration screen appears.

2. Click Protocol Control.

3. Check or uncheck the network and IP protocols to enable or disable the necessary protocols.

Note: If you disable the TCP/IP protocol, all IP protocols will be disabled automatically.

4. Click Submit.

5. Click the reset link at the bottom of the screen. The Reset Server screen appears.

6. Click Submit and wait five seconds for the printer to reset. Even though you submitted your changes on the previous screen, they do not take effect until you reset the printer.

You must re-enter your access password to make any further changes to the printer settings.

Using the Web Interface 4-19