Pentax Optio MX4 specifications Press the m button in Capture Mode to display j or p on, B c a

2, 3

1

d R b c a

Continuous Shooting (Continuous Shooting/ High-Speed Continuous Shooting Mode)

Pictures are taken continuously while the shutter release button is pressed.

1 Press the m button in Capture	a	38
mode to display j or p on the		00 : 02 : 48

LCD monitor.

2 Press the shutter release button halfway.

07/25/2004

The focus frame turns green if the subject is # 14 : 25 in focus.

3 Press the shutter release button fully.

Pictures are taken continuously while the shutter release button is pressed. Shooting stops when you take your finger off the shutter release button.

jEach image is saved separately in the memory before the next image is taken. The higher the image quality, the longer the interval between shots.

pUp to two images are taken one after another while the shutter release button is pressed and are saved together in the memory. This action is repeated as long as the shutter release button is pressed, enabling high-speed continuous shooting in groups of up to two images.

• You can continue shooting until the SD Memory Card is full.

• The interval will vary according to the Recorded Pixels and Quality Level settings.

• The flash will not discharge in Continuous Shooting mode and High-Speed Continuous Shooting mode.

•Continuous shooting is not possible in Panorama Assist in dmode.

•The focus, exposure and white balance are locked with the first image.

4

Taking Still Pictures

55