Controls

7.05 Adjustmentleverforzigzagstitchandneedleposition

4

L M

3 R

1

2

Fig. 7 - 05

●The zigzag stitch adjustment lever1 is used for adjusting the width of the zigzag stitch.

●To change the position of the adjustment lever, the locking lever2 must be pressed against the adjustment lever1.

The current zigzag-stitch width can be seen on scale3.

●By turning the needle-position adjustment lever4 the required needle position can be set.

L= needle-position left

M= needle-position center

R= needle-position right

7.06

Reverse-feed key

● The machine sews in reverse as long as the reverse-feed key1 is pressed.

1

Fig. 7 - 06

7 - 3