Installation and commissioning
8.02 | Fitting the |
5
8
7
3
6
2
4 1
Fig. 8 - 04
●Loosen screws1 and remove toothed belt wheel2 from the motor shaft3.
●Attach bearing plate4 to the motor5 with screws6 as shown
●Slide toothed belt wheel2 onto the motor shaft 3 and fasten with screws1.
●Slightly tilt bearing plate4 with motor5 to the side and place the toothed belt7 on the toothed belt wheels.
●Align bearing plate4 of motor5 on the machine case and attach it with screws8.
8.03 FitthebeltguardoftheQuickflange-motor.
● Attach belt guard1 with screws2 and3.
3
1
2
Fig. 8 - 05
8 - 3