Adjustment

12.05.10 Needle position adjustment lever

Requirement

The left and right throws of the needle must be the same size at the largest zigzag stitch setting and at the left or right needle position.

3

1

2

4

Fig. 12 - 11

● Loosen screws1 and2.

● Set the needle position adjustment lever3 to"middle" and the zigzag stitch adjustment lever 4 at the largest zigzag stitch.

●Place a piece of paper underneath the presser foot and perforate it to the left and right with the needle.

●Set the zigzag stitch adjustment lever4 at"0" and move the needle position adjustment lever3 to the right/left until the needle is exactly over the perforations made in the last step.

●For the left needle-position bring screw1 to a position where it touches and tighten it and for the right needle-position do the same with screw 2.

12 - 12