Installation and commissioning

TE

700 0

C

●Sew one stitch by operating the pedal.

●Turn the balance wheel in the direction of sewing until the tip of the needle is level with the top edge of the needle plate.

●By pressing the corresponding+/-key,select parameter "702".

TE

702 70

C

●By pressing the corresponding+/-key,enter the value "70".

●By pressing the corresponding+/-key,select parameter "703".

TE

703 222

C

●By pressing the corresponding+/-key,enter the value "222".

●Conclude the adjustment of the sewing motor by pressing theTE/Speed key.

The adjustment described above only applies to machines with Eco-Drive! When using another type of motor, please observe the motor instruction manual of the manufacturer.

8 - 7