Adjustment
12.05.05 Zero stitch and zigzag stitch scaleRequirement
With the zigzag stitch set at"0":
1.the needle bar must not move laterally when the balancewheel is turned and
2.the marking"0" on scale 1 must be at marking 2.
4
7
1
2
7 
3
6
5
Fig. 12 - 06
● Set the needle position adjustment lever4 to"middle" and loosen screws 5 and6.
● Run the machine slowly and turn the zigzag stitch adjustment lever3 to the right until the needle bar no longer moves laterally.
●Turn the machine off. Move screw 5 to the right until it touches and then tighten it.
●Loosen screws7 and move scale1 in accordance withrequirement2.
●Tighten screws 7.
Screw 6 remains loose for the following adjustment.
12 - 7