Setting up
9.06 Settingthezigzagstitchandthestitchposition
|
| ● Set the zigzag stitch width by turning the | |
|
| zigzag lever1. | |
| 4 | ● To vary the adjustment press catch2 | |
|
|
| |
| M | against zigzag lever1. | |
L | R | ● The setting can be read from scale3. | |
3 |
| ● Set the stitch position by turning stitch | |
|
| position lever4. | |
|
| L = | stitch position on left |
|
| M = | stitch position in the middle |
| 1 | R = | stitch position on the right |
2
Fig. 9 - 08
9.07 Adjustingthestitchlength
● Adjust the stitch length by turning the feed regulator wheel 1.
● The setting can be read on scale2.
1
2
Fig. 9 - 09
9 - 6