Adjustment

12.06 Adjustingtheunderedge trimmer-771/04

12.06.01 Resting position of the knife

Requirement

When adjustment lever1 is set at "0", the knife stroke should be as small as possible.

1

6

4

65 mm

5

 

3

2

90°

7

Fig. 12 - 32

4 1

9

8

●Unscrew the milled screw of adjustment lever1 (screw2).

●Remove cover3 (screws4).

●Place crank5 (screws6) at right angles to the bed plate, and at the same time set a distance of65mm between adjustment lever1 and the bedplate.

●Screw cover3 (screws4) back on.

●Set adjustment lever1 at "0".

●Remove cover cap7 and check the lifting motion of the knife by turning the motor impeller wheel (see requirement).

●Adjust crank8 (screw 9) in accordance with the requirement.

12 - 33