Care and maintenance
11.03 Oilingthezigzagdrive
4
4
5 | 2 |
1
3
Fig. 11 - 04 | Fig. 11 - 05 |
Switch off the machine!
Danger of injury if the machine is started accidentally!
Only use oil with a mean viscosity of 68.00 m2/s at 40° C and a density of 0.881 g/cm3 at 15° C.
●Check the oil level before each operation.
●If necessary, remove screw1 and fill in oil up to top marking2.
●Tighten screw1.
Never allow the oil level to sink below the minimum mark3!
Danger of damage to the machine!
To fill in larger quantities of oil, e.g. when filling for the first time before commissioning, it is better to remove cover5.
●Loosen screws4 and remove cover5.
●Take care that no dirt gets into the case.
●Fill in oil up to the top marking2.
●Clean the surface of cover5, the case and the seal.
●Replace cover5 and tighten screws4.
We recommend PFAFF sewing machine oil, part no.
11 - 3