Adjustment

12.05.07 Zigzag stitch width

Requirement

At the largest zigzag stitch setting, marking 1 must be at the largest zigzag value on scale 2.

2

1

4

3

Fig. 12 - 08

● Turn the zigzag stitch adjustment lever3 in accordance with therequirement. ● Move screw4 upwards until it touches and then tighten it.

If the machine is equipped with a needle plate with a smaller hole than is marked on the scale, the zigzag limit must be set according to the needle hole width on the needle plate.

12 - 9