Installation and commissioning
8.01.02 Mounting the upper V-belt guard / Fitting the machine cover
1
8
9 | 2 |
5 6
7 | |
|
4
3
Fig. 8 - 02
●Slide the left and right halves of the V- belt guard into place with the slots behind the heads of screws1 and2.
●Screw screw3 with distance bush4 into threaded hole5.
●Align the
●Tighten screws1 and2 (through holes 8 and9) and screw3.
●When using an external motor, the motor cover must also be fitted as described by the motor manufacturer.
8.01.03 Fitting the reel stand
● Fit the reel stand as shown
provided.
Fig. 8 - 03
8 - 2