Philips AC4054 Body of the appliance, Air quality sensor, Particle filter and gas filter, English

English

Body of the appliance

Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside.

1Wipe away dust with a dry, soft cloth from the body of the appliance.

2Clean the air inlet and the air outlet with a vacuum cleaner.

Air quality sensor

If the air quality sensor is dirty, it becomes unreliable.

1Remove dirt with a soft brush or with a vacuum cleaner.

Particle filter and gas filter

1Remove the filters from the appliance (see chapter ‘Filter replacement’, section ‘Removing the filters’).

2Remove visible dirt with a vacuum cleaner.

Never clean the particle filter and the gas filter with water or any other liquid or detergent. If the filters get wet, dispose of them and replace them with new filters.

Note: Under normal usage conditions, we advise you to place the gas filter in direct sunlight in a room with natural ventilation for 3-4 hours every 4 months.This helps maintain good filter performance and prolongs the life of the filter. In case of more extreme usage conditions (smoking environment, just renovated room, non-domestic use etc.) and more frequent use, you have to do this more often.

Pre-filter

1Clean the pre-filter with a vacuum cleaner. Note:You can also clean the pre-filter in water.

2If you have cleaned the pre-filter in water, properly dry it before you place it back into the appliance.

Filter replacement

Particle filter

,In case of normal household use in a non-smoking environment and proper maintenance (see chapter ‘Cleaning and maintenance’), the particle filter lasts approx. 5 years.

,Replace the particle filter when the filter colour matches the appropriate colour of the appropriate section of the filter replacement label.

Filter replacement label

,The appliance (and each new filter) comes with a filter replacement label with two sections: (Fig. 17)

-a section with a dark brown colour (the colour of tobacco stains) for smoking environments;

-a section with a dark grey colour (the colour of dirt and dust) for non-smoking environments.

You can stick the filter replacement label on the side of the particle filter surface for your reference.

, A new particle filter is available under the following type numbers:

-AC4105 for CleanAir System AC4054/AC4052

-AC4106 for CleanAir System AC4064/AC4062

Gas filter

In case of normal household use and proper maintenance (see chapter ‘Cleaning and maintenance’), the gas filter lasts approx. 5 years.