Pinnacle Design 37T100105 Setup the Codec Preset 5 in the timeline, XSend a sequence with HD422

Chapter 3: Installation and Setup

Setup the Codec Preset 5 in the timeline

1.To setup a Codec Preset right click a empty space of the timeline and select Timeline properties... from the drop-down menu (see Figure 3-34 on page 35).

2.In the Render/Fuse Codec Pres. dropdown list box, select the Codec Preset value you just created. For this example we select the Preset 5: HD422 @ 80MBit/s.

Figure 3-49: Timeline Properties HD 422

XSend a sequence with HD422

1.To XSend a sequence right-click the sequence you want to send, select the submenu XSendTo and here the menu point XSendToMSS.

2.When the XSend to XSend To MSS dialog appears, leave settings as default and click OK.

3.The IBP Settings dialog appears.Select the <MPEG-2 422P@HL> Reference Set. Change the Bitrate mode to Constant (CBR). Drag Maximum Bit Rate slider to 80.00. Check the 4:2:2 and Extended Resolution boxes. Its ok to leave the other settings as default (see Figure 3-38 on page 37).

4.Click OK in the Fuse Sequence dialog that appears.

MMG Installation, Setup, and Operations Guide 45