Pinnacle Design 37T100105 manual Audio Settings For Blue, Settings Tab

Chapter 3: Installation and Setup

Audio Settings For Blue

MediaStream has the capability to use up to eight tracks, or four pair of audio tracks. Liquid Blue natively uses two pair of audio tracks, but can be set up to use eight. When a timeline with eight tracks of audio is XSent to MSS, all eight are available on MSS.

The audio output in Blue is controlled by logical busses. Each logical bus produces one pair of audio output files. To generate four pairs of audio tracks, configure four logical busses.

To configure Blue to XSend with 8 tracks of audio use the Audio icon to open the audio tool.

On the Settings tab (Figure 3-26), check the box next to Logical Output Bus under Visible Mixer Elements. This causes the output bus to appear on the Mixer tab.

Figure 3-26: Settings Tab

Click on the Mixer tab (Figure 3-27). Notice the headers on the columns are labeled Name1, Name2 and so on. These labels correspond to the labels of the rows on the timeline. For each row on the timeline that has audio enabled, there is a corresponding column in the mixer. The default setting for Blue is to use one logical bus and create one pair of audio output files. Click on the + on the second row to maximize the logical bus configuration.

Figure 3-27: Mixer Tab

MMG Installation, Setup, and Operations Guide 31