Pinnacle Design 37T100105 Preset 2 SD PS S422 IBBP and SD PS E422 IBBP, 39 Fuse Sequence Progress

Chapter 3: Installation and Setup

4.Click OK in the Fuse Sequence dialog that appears. As the fuse begins, your screen should look something like this (Figure 3-39):

Figure 3-39: Fuse Sequence Progress

Preset 2: SD PS S422 IBBP and SD PS E422 IBBP

1.To setup a codec, go to Edit menu > Control Panel and select Site Tab.

2.Double click Codec Presets.

3.Select the “MPEG-2 MP@HL (M2V)” codec as starting point. Click the two plus symbols on the right to duplicate this preset (see Figure 3-32 on page 35).

4.Type a descriptive name for the preset you want to create in the textfield. For this example enter SD PS 422 IBBP.

5.To edit the Codec Properties click the top Edit button. In Codec Properties select a maximum Bitrate of 50 MBit/s. Keep the I-Frame only unchecked. Check the 4:2:2 checkbox.Click the accept icon.

.

Figure 3-40: Codec Properties

38 MMG Installation, Setup, and Operations Guide