XCrossfader (page 12)
YMASTER (page 12)
ZMaster Level Indicator (page 12)
ABALANCE (page 13)
BMONO, STEREO (page 13)
CBOOTH MONITOR (page 13)
DSTART/STOP (SNAPSHOT) (page 16)
EON/OFF (MIDI) (page 16)
FCH EQ (ISOLATOR, EQ) (page 12)
GCH FADER (
, 
) (page 13)
HCROSS FADER (
, 
, 
) (page 13)
Basic Operation
Outputting sound
1 Press [POWER].
Turn on the power of this unit.
2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch
Select the input sources for the different channels from among the devices con- nected to this unit.
—[CD/DIGITAL]: Selects the DJ player connected to the [CD] terminals. To select the DJ player connected to the [DIGITAL IN] terminal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL].
—[PHONO]: Selects the analog player connected to the [PHONO] terminals.
—[LINE]: Selects the cassette deck or CD player connected to the [LINE] terminals.
—[USB */*]: Selects the sound of the computer connected to the [USB] port.
3 Rotate [TRIM].
Adjusts the level of audio signals input in each channel.
The corresponding channel level indicator lights when audio signals are being properly input to that channel.
4 Set the channel fader to the inner position.
Adjusts the level of audio signals output in each channel.
5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch.
Switches the output destination of each channel.
—[A]: Assigns to [A] (left) of the crossfader.
—[B]: Assigns to [B] (right) of the crossfader.
—[THRU]: Choose this when you do not want to use the crossfader. (The signals do not pass through the crossfader.)
6 Set the crossfader.
This operation is not necessary when [CROSS FADER ASSIGN (A, THRU, B)] is set to [THRU].
7 Turn the [MASTER] control.
Audio signals are output from the [MASTER1] and [MASTER2] terminals. The master level indicator lights.
Adjusting the sound quality
Turn the [EQ/ISO (HI, MID, LOW) ] controls for the individual channels.
Refer to Specifications on page 28 for the range of sound that can be adjusted by each control.
Switching the [EQ/ISO (HI, MID, LOW)] function.
Switch the [CH EQ (ISOLATOR, EQ)] switch.
—[ISOLATOR]: The isolator function is set. The indicator lights.
—[EQ]: The equalizer function is set.
Monitoring sound with headphones
1Connect headphones to the [PHONES] jack.
2Press [CUE] for the channel to be monitored.
3Switch the [MONO SPLIT, STEREO] switch.
—[MONO SPLIT]: The sound of the channel for which [CUE] is pressed is output from the headphones output’s left channel, while the sound of [MASTER] is output from the right channel.
—[STEREO]: The sound of the channel for which [CUE] is pressed is output in stereo from the headphones.
4Turn the [MIXING] control.
This adjusts the balance of the monitor volume between the sound of the channel for which [CUE] is pressed and the [MASTER] channel sound.
5 Turn the [LEVEL] control for [HEADPHONES].
Sound is output from the headphones in the channel selected by [CUE].
!Monitoring is canceled when [CUE] is pressed again.
!When [LIVE SAMPLER] is turned on, [CUE] button for the TOUCH PANEL EFFECT and [CUE] button for the [LINK] cannot be pressed simultaneously.
12En
