Pioneer DJM-2000 Changing the settings, Setting preferences, About the auto standby function

Changing the settings

1

1Setup item button

1Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least 1 seconds.

The [USER SETUP] screen appears.

The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes.

!To display the [CLUB SETUP] screen, first turn this unit’s power off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY, WAKE UP)].

2 Press the setup item button.

The selection items appear.

3 Select the setup item.

Select the item on the touch panel and enter it.

4 Change the item’s setting.

Select the item on the touch panel and enter it.

!Press [SAVE] to save the changes to the [CLUB SETUP] screen.

5 Press [EXIT].

The [USER SETUP] screen closes.

!To close the [CLUB SETUP] screen, press [POWER] to turn this unit’s power off.

Setting preferences

Settings indicated in italics are the default settings set upon purchase.

Mode	Options settings	Selection item 1	Selection item 2	Selection item 3	Descriptions
			BUTTON ACTION	TOGGLE	Select the MIDI signal sending method, [TOGGLE] or [TRIGGER].
		ZONE11
				TRIGGER
			MIDI CHANNEL	1, 2, to 16	Sets the MIDI channel.
	MIDI		BUTTON ACTION	TOGGLE	Select the MIDI signal sending method, [TOGGLE] or [TRIGGER].
				TRIGGER
		ZONE22	MIDI CHANNEL	1, 2, to 16	Sets the MIDI channel.
USER SETUP			RESET	—	Restores the [TYPE A] – [TYPE D] MIDI settings to the default values.
					[RESET] function is unique to [ZONE2].
		LINK	CH1 to CH4	ON, OFF	Turns the fader start function of the DJ players connected to the
					[LINK] terminals on and off.
	FADER START
		CONTROL	CH2, CH3	ON, OFF	Turns the fader start function of the DJ players connected to the
					[CONTROL] terminals on and off.
	LCD	BACK LIGHT	1, 2, 3, 4, 5	—	Adjusts the touch panel’s brightness.
	VERSION No.	—	—	—	Displays the DJM-2000’s software version.
		DIGITAL OUT MAX	–19 dB, –15 dB, –10 dB,	—	Adjusts the maximum audio level output from the [DIGITAL OUT]
		LEVEL	–5 dB		terminal.
	SYSTEM	DIGITAL SAMPLING	48 kHz, 96 kHz	—	Switches the digital signal sampling rate.
		RATE
		AUTO STANDBY	ON, OFF	—	Turns the auto standby function on and off.
		OUTPUT TO BOOTH	ON, OFF	—	Sets whether or not to output the microphone’s audio signals from
		MONITOR			[BOOTH] terminals.
CLUB SETUP
		TALK OVER THRESH-	–25 dB, –20 dB, –15 dB,		Sets the talkover sensitivity. The talkover function is activated when
	MIC			—	a sound with a volume above the set volume is input to the micro-
		OLD LEVEL	–10 dB
					phone.
		TALK OVER LEVEL	–25 dB, –20 dB, –15 dB,	—	Sets the attenuation level for the sound other than the microphone’s
			–10 dB		sound when the talkover function is activated.
	TOUCH PANEL	—	—	—	The touch panel’s calibration is adjusted by pressing [+] in order.
	FACTORY RESET	YES, NO	—	—	Restores all the settings to their factory defaults.

1Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX].

2Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen.

About the auto standby function

When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met.

—That none of this unit’s buttons or controls are operated.

—That no audio signals of –10 dB or greater are input to this unit’s input terminals.

—That no PRO DJ LINK connections are made.

!The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed.

24En