
Types of BEAT EFFECT
DELAY1
Original (4 beats)
1/2 delay (8 beats)
This function outputs a delay sound once according to the beat button’s fraction. When 1/2 beat delay sound is added, 4 beats become 8 beats.
Beat buttons (parameter 1) | Use these to set the delay time from 1/8 to 4/1 with respect to 1 | |
| beat of BPM time. | |
TIME (parameter 2) | Use this to set the delay time. | |
1 to 4000 (ms) | ||
| ||
LEVEL/DEPTH (param- | Use this to set the balance between the original sound and the | |
eter 3) | delay sound. | |
EFFECT FREQUENCY | Use these to set the balance between the original sound and | |
(parameter 4) | the delay sound for the different bands. |
REVERB1 2
Direct sound Early reflected sound
Level | Reverberations |
|
1%
Time
100%
This function adds a reverberation effect to the input sound.
Beat buttons (parameter 1) These set the degree of the reverb effect from 1 to 100 %.
TIME (parameter 2) | Use this to set the degree of the reverb effect. | |
1 to 100 (%) | ||
| ||
|
| |
LEVEL/DEPTH (param- | Sets the balance between the original sound and the effect | |
eter 3) | sound. | |
|
| |
EFFECT FREQUENCY | Use these to set the balance between the original sound and | |
(parameter 4) | the effect sound for the different bands. | |
|
|
ECHO1 2
Input sound turned off
|
|
|
|
|
|
|
|
|
| 1 beat |
| Time | |||
|
|
|
|
|
This function outputs increasingly attenuated delay sounds several times accord- ing to the beat button’s fraction.
With 1/1 beat echoes, the delay sounds are faded out according to the track’s tempo even after the input sound has been cut.
Beat buttons (parameter 1) | Use these to set the delay time from 1/8 to 4/1 with respect to 1 | |
| beat of BPM time. | |
TIME (parameter 2) | Use this to set the delay time. | |
1 to 4000 (ms) | ||
| ||
LEVEL/DEPTH (param- | Use this to set the balance between the original sound and the | |
eter 3) | echo sound. | |
EFFECT FREQUENCY | Use these to set the balance between the original sound and | |
(parameter 4) | the echo for the different bands. |
ROLL1 2
Original
Effect turned on
1/1 roll
Repeated
This function records the input sound at the point at which the [ON/OFF] but- ton is pressed and repeats the recorded sound according to the beat button’s fraction.
Beat buttons (parameter 1) | The effect time is set from 1/8 to 4/1 with respect to 1 beat of | |
| BPM time. | |
TIME (parameter 2) | Use this to set the effect time. | |
10 to 4000 (ms) | ||
| ||
|
| |
LEVEL/DEPTH (param- | Use this to set the balance between the original sound and | |
eter 3) | ROLL. | |
|
| |
EFFECT FREQUENCY | Use these to set the balance between the original sound and | |
(parameter 4) | the ROLL for the different bands. | |
|
|
MULTI TAP DELAY1
MIN MAX
|
|
|
|
|
|
|
| 1/1 beat |
| Time | |
|
|
|
|
|
MIN MAX
1/4 beat
MIN MAX
EFFECT FREQUENCY | 1/8 beat |
This function outputs up to 7 delay sounds in 1/8 units, according to the beat button’s fraction.
The volume of the delay sound can be adjusted with the [EFFECT FREQUENCY] controls.
The volume of the odd delay sounds is adjusted from [MIN] to the center posi- tion, the volume of the even delay sounds is adjusted from the center position to [MAX].
Beat buttons (parameter 1) | The effect time is set from 1/8 to 4/1 with respect to 1 beat of | |
| BPM time. | |
TIME (parameter 2) | Use this to set the delay time. | |
10 to 4000 (ms) | ||
| ||
|
| |
LEVEL/DEPTH (param- | Use this to set the balance between the original sound and the | |
eter 3) | delay sound. | |
|
| |
EFFECT FREQUENCY | This sets the volume of the delay sound for the different bands. | |
(parameter 4) | ||
| ||
|
|
SLIP ROLL1 2
Original
Effect turned on | Changed from 1/2 |
|
| |||
|
|
| to 1/1 |
|
| |
Roll |
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
| 1/2 repeat | 1/1 repeat |
|
This function records the input sound at the point at which the [ON/OFF] but- ton is pressed and repeats the recorded sound according to the beat button’s fraction.
When the effect time changes, the input sound is recorded again.
Beat buttons (parameter 1) | The effect time is set from 1/8 to 4/1 with respect to 1 beat of | |
| BPM time. | |
TIME (parameter 2) | Use this to set the effect time. | |
10 to 4000 (ms) | ||
| ||
LEVEL/DEPTH (param- | Use this to set the balance between the original sound and | |
eter 3) | ROLL. | |
EFFECT FREQUENCY | Use these to set the balance between the original sound and | |
(parameter 4) | the ROLL for the different bands. |