| |
Out | The total number of packets that |
Pkts | non- unicast (that is, a |
| including those that were discarded or not sent. |
Out Discards | The number of outbound packets which were chosen to be discarded even though no |
| errors had been detected to prevent their being transmitted. One possible reason for |
| discarding such a packet could be to free up buffer space. |
Out Errors | The number of outbound packets that could not be transmitted because of errors. |
CRC Errors | Number of Ethernet Cyclic Redundancy Check errors detected by this device. |
|
|
| |
|
|
Single Collisions | The number of successfully transmitted frames for which transmission is inhibited by |
| exactly one collision. |
Deferred | A count of frames for which the first transmission attempt on a particular interface is |
Transmissions | delayed because the medium was busy. |
Excessive | The number of frames for which transmission failed due to excessive collisions. |
Collisions |
|
Drop Events | The total number of events in which packets were dropped due to lack of resources |
Octets | Number of octets passing through this port. |
Multiple Collisions A count of successfully transmitted frames for which transmission is inhibited by more than one collision.
Late Collisions | The number of times that a collision is detected later than 512 |
| transmission of a packet. |
Carrier Sense | The number of times that the carrier sense condition was lost or never asserted when |
Errors | attempting to transmit a frame. |
Fragments | The total number of frames received that were less than 64 octets in length (excluding |
| framing bits, but including FCS octets) and had either an FCS or alignment error. |
Jabbers | The total number of frames received that were longer than 1518 octets (excluding |
| framing bits, but including FCS octets), and had either an FCS or alignment error. |
|
|
NOTES: Statistics are refreshed every 10 seconds by default (See “4.4.2 Configuring the Serial Port”).
WGS3 Layer 3 Switch User’s Manual | - 96 - |