Parameter | Default | Description |
Area ID |
| An identifier for the transit area the virtual link crosses. |
Neighbor IP |
| The IP address of the OSPF router on this end of the virtual link. |
Transit Delay | 1 second | The estimated number of seconds it takes to transmit a link state |
|
| update packet over this virtual link. Range: |
Retransmit | 5 seconds | The number of seconds between retransmitting |
Interval |
| advertisements to the router at the other end on the virtual link. This |
|
| value is also used when retransmitting database descriptions and |
|
| |
Hello Interval2 | 10 seconds | The interval, in seconds, between sending Hello packets out the router |
|
| interface. Range: |
Dead Interval2 | 40 seconds | The number of seconds that a router’s Hello packets have not been |
|
| seen before the router at the other end of the virtual link is declared |
|
| down. This should be a multiple of the Hello interval. Range: |
|
| seconds |
Authentication | None | Authentication can be used to ensure that routing information comes |
Type |
| from a valid source. The options include none or a simple password. |
Authentication |
| A simple password must be provided if authentication is enabled. (An |
Key |
| authentication string is case sensitive, and can be up to 16 characters.) |
|
|
|
WGS3 Layer 3 Switch User’s Manual | - 192 - |