are attaching to is VLAN-aware), and configure an IP interface for this VLAN if you need to connect it to other group.

This parameter is for WGS3-2620 only. WGS3-404’s default setting is Rx All and use VLAN Table Configuration for Tx.

Parameter

Default

Description

GVRP

Enabled

Enables or disables GVRP for this port. When disabled, any GVRP

 

 

packets received on this port will be discarded and no GVRP registrations

 

 

will be propagated from other ports.

 

 

Note that GVRP must be enabled globally for the switch before this

 

 

setting can take effect. (See “4.5.3.1 Configuring Global Bridge Settings”)

GMRP*4

Enabled

Enables or disables GMRP for this port. When enabled, this port will allow

 

 

end stations to register with multicast groups using GMRP. Note that

 

 

GMRP must be enabled for the switch before this setting can take effect.

 

 

IGMP and IGMP Snooping also provide multicast filtering. (See “6.4.2

 

 

IGMP Protocol”)

Ingress

Disabled

If enabled, incoming frames for VLANs which do not include this ingress

Filtering *5

 

port in their member set will be discarded at the ingress port.

 

 

4:Only displayed on WGS3-2620.

5:This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, they do affect VLAN dependent BPDU frames, such as GMRP.

WGS3 Layer 3 Switch User’s Manual

- 170 -