Jumbo Packet Menu *4

Allows the switch to send jumbo packet up to 9k

Network Monitor Menu

 

 

 

Port Statistics

Displays statistics on network traffic passing through the selected port, including

 

information from the Interfaces Group, Ethernet-link MIB, and RMON MIB

 

 

Layer 2 Address Table

Contains the unicast address table.

 

 

Bridge Menu

Displays Spanning Tree information for the overall bridge and for specified ports.

 

 

VLAN Menu

Displays dynamic port registration information for VLANs, as well as all VLAN

 

forwarding information for static and dynamic assignment.

 

 

IP Multicast

Displays all the multicast groups active on this switch, including the multicast IP

Registration Table *1

addresses and corresponding VLANs.

IP Menu *2

Displays all the IP subnets used on this switch, as well as the corresponding

 

VLANs and ports. Also contains the ARP table, routing table and multicast

 

table.

 

 

Restart System Menu

Restarts the system with options to reload factory defaults.

 

 

1: Only displays when the WGS3-2620 is set to Layer 2 mode.

2.Only displays when WGS3-2620 is set to multilayer mode and WGS3-404..

3.Only displays when using WGS3-2620.

4.Only displays when using WGS3-404

WGS3 Layer 3 Switch User’s Manual

- 141 -