The Static Unicast Address Table can be used to assign the MAC address for a host device to a specific port on this switch. Static unicast addresses are never aged out, and cannot be learned by another port. If any packets with a source address specified in this table enter another port, they will be dropped. The Static Unicast Address Table is described in the following figure and table.
Parameter | Description |
MAC Address | The MAC address of a host device attached to this switch. |
Port | The port to which the host device is attached. |
|
|
NOTE: To assign an address to a specific port, enter it in the MAC Address field, select the corresponding port, and press Save. To delete an address, click 
and press Delete for the required entry.
WGS3 Layer 3 Switch User’s Manual | - 161 - |