4.5.1Setting the System Operation Mode), the IP Menu will be displayed. Use this menu to configure the IP subnets for each VLAN on your switch, the unicast and multicast routing protocols, static ARP entries, static IP routes, and the default IP Route.
Parameter | Description |
Subnet Configuration | Specifies the IP interface for VLANs configured on this switch, including the |
| subnet address and routing |
| Protocols |
Protocol Configuration | Configures ARP timeout, enables Proxy ARP, sets the preferred servers for |
| BOOTP/DHCP Relay, as well as enabling/configuring unicast and multicast |
| protocols globally for this switch. |
Static ARP Configuration Used to map an IP address to a specific physical MAC address | |
Static Route | Used to configure static routes to other IP networks, subnetworks, or hosts. |
Default Route | Defines the router to which this switch will forward all traffic for unknown |
| networks. |
|
|
WGS3 Layer 3 Switch User’s Manual | - 61 - |