4.4.4 User Login Configuration
Use the User Configuration menu to restrict management access based on specified user names and passwords. There are two user types, Administrator and Guest. Only the Administrator has write access for parameters governing the SNMP agent. You should therefore assign a user name and password to the Administrator as soon as possible, and store it in a safe place. (If for some reason your password is lost, or you cannot gain access to the System Configuration Program, contact Technical Support for assistance.) The parameters shown on this screen are indicated in the following figure and table.
Parameter | Description |
User Name | Specifies a user authorized management access to the switch via the console, |
| Telnet or HTTP. |
Access Right | There are two options. ADMIN: Read/Write for all screens. GUEST: Read Only |
| for all screens. |
Console | Authorizes management via the console. |
Telnet | Authorizes management via Telnet. |
HTTP | Authorizes management via HTTP (that is, Microsoft Internet Explorer 4.0 or later |
| version. It does not support Netscape currently). |
|
|
WGS3 Layer 3 Switch User’s Manual | - 32 - |