Chapter 1. Introduction
Both WGS3-404 and WGS3-2620 are IP-based Layer 3 Gigabit Ethernet Switch. WGS3-404 is with 4-port 10/100/1000Mbps and 4-slot for 1000Base-T and 1000Base-SX modules. WGS3-2620 is with 24-port 10/100Mbps and 2-port 1000Mbps switches.
The 2 and four RJ-45 gigabit copper ports support 10/100/1000Mbps auto-MDI/MDI-X detection that can directly connect to any Gigabit Ethernet Servers, Switches, L3 backbone with a straight Category 5/5e, 8-wire UTP cable.
The wire-speed switch engine provides up to 8.53 and 16Gbps switch fabric for L2 and L3 IP routing capability. Up to 256 IP subnet / L2 tagged VLAN are also available to segment the IP or MAC-based networks. IEEE802.1D Spanning Tree, bridging, Port mirroring and port trunking also support for optimal LAN connection and diagnose. IGMP snooping, filtering, dual priority helps to build a multimedia networks like video-conference etc.
Designed to offer the guaranteed IP Layer 3 routing with RIP, OSPF and DVMRP support, the WGS3-404 and WGS3-2620 empower the performance of pure IP-based network easier then ever.
1.1Features
•WGS3-404 is with 4-port 10/100/1000Mbps and 4-slot for 1000Base-SX, 1000Base-T modules.
•WGS3-2620 is with 2-port 1000Mbps, 24-port 10/100Mbps Ethernet Switch
•Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX, IEEE 802.3z, 1000Base-SX and IEEE 802.3ab, 1000Base-T standards
•IEEE 802.3x, full-duplex flow control compliant; back-pressure half-duplex flow control
•IEEE 802.1p, dual priority; IEEE802.1Q, VLAN Tagging; IEEE802.1D Bridging compliant
•32K MAC address table auto-ageing / 64K IP address at most
•IPv4 Layer 3 routing, supporting RIP-1/2, OSPF, DVMRP (Distance-Vector Multicast Routing Protocol)
•8.53G/19.2G non-blocking, Store and Forward switching architecture
•RS-232 console interface for console program managements, Web / Telnet Support
•Port-based Trunking support increase the bandwidth between switches (2/4/8-port in one trunk)
•255 port-based VLANs eliminate the broadcast-packet, increase the LAN security for different segments
•IGMP multicast snooping and filtering
•Port mirroring for port traffic diagnose with sniffer programs
•RMON group 1, 2, 3, 9 support
•19”, 1U height rack mounting
•100~240VAC, 50~60Hz universal Power input
•FCC, CE class A compliant
WGS3 Layer 3 Switch User’s Manual | - 1 - |