5.7.5.5 Configuring the Default Route

Defines the router to which this switch will forward all traffic for unknown networks.

The default route can be learned from RIP protocol or manually configured. If the switch does not contain a default route, any packet that does not match an entry in the routing table will be dropped. To manually configure a default route, enter the next hop in the following table.

Parameter

Description

VLAN

The VLAN which has the IP interface to the default router.

Next Hop

The IP address of the default router.

Address

 

Metric

The number of hops required to reach the default router.

 

 

WGS3 Layer 3 Switch User’s Manual

- 198 -