4.5.4.2 VLAN Table Configuration

Use this screen to create a new VLAN or modify the settings for an existing VLAN.

The VLAN Table Configuration of WGS3-2620 and WGS3-404 are slightly different. For WGS3-2620, the VLAN Table Configuration is as the following:

The configuration parameter for WGS3-2620 is as the following:

Parameter

Description

VLAN

The ID for the VLAN currently displayed. Range: 1-4094

Port

Port entries may be marked as:

 

- : (Normal) Uses GVRP to determine port membership.

 

S : (Static) Adds port as a static entry. GVRP protocol is disabled.

 

R : (Registration Fixed) Adds port as a static entry. GVRP protocol messages are still

 

forwarded through this port.

 

X : (Forbidden) Disables GVRP for this VLAN on the specified port.

 

If a removed port is no longer assigned to any other group as an untagged port, it will

 

automatically be assigned to VLAN group 1 as untagged.

 

 

NOTE: Use the <Next Page> and <Prev Page> buttons to scroll through the table. To display a specific page, set the page number in the Page field and press <Apply>. To modify a VLAN group, highlight the entry in the table and press Enter. To add a VLAN group, press <Add>.

WGS3 Layer 3 Switch User’s Manual

- 55 -