Address Resolution Protocol (ARP) defines a method for extracting a host’s Ethernet address from its Internet address. This table shows the
Parameter | Description |
IP Address | IP addresses for which ARP has resolved the physical address through a broadcast |
| message. |
MAC Address | MAC address that maps to the corresponding IP address. |
VLAN | The VLAN group to which this host has been assigned. |
Port | The port this to which host device is attached. (Port “0” refers to an interface defined on |
| this switch.) |
|
|
The Routing Table lists the routes through which all recognized Ethernet networks (and corresponding VLANs) can be reached. This table includes all routes learned through routing protocols or manual configuration.
Parameter | Description |
Destination | A destination network, subnet or host. |
Network |
|
Destination Mask | The subnet mask that specifies the bits to match. A routing entry will be used for a |
| packet if the bits in the address set by the destination mask match the Destination |
| Network. |
|
|
WGS3 Layer 3 Switch User’s Manual | - 215 - |